Debugging

CHANGES.md

@@ -73,7 +73,7 @@ This class is implementing a generic MCP23017 driver. It is instanciated in the
 - as mcp_int (for all Inkplate devices) 
 - as mcp_ext (for the Inkplate-10, and Inkplate-6Plus).
 
-Each class that uses the MCPs are independant from each other in terms of initialzing and accessing the MCP. This is the case for EInk, Battery, TouchKeys, Backlight. They all uses `Wire::enter()` and `Wire::leave()` to reserve access to the I2C bus.
+Each class that uses the MCPs are independant from each other in terms of initialzing and accessing the MCP. This is the case for EInk, Battery, TouchKeys, TouchScreen, Frontlight. They all uses `Wire::enter()` and `Wire::leave()` to reserve access to the I2C bus.
 
 ## battery, touch_keys (.hpp, .cpp)
 
@@ -81,7 +81,7 @@ Those classes implement basic access to the battery and touch keys state.
 
 ## system class renamed InkplatePlatform
 
-This name reflect more what it is. This class will is currently under eavy changes.
+This name reflect more what it is: the integration of all physical drivers for an Inkplate device. 
 
 ## FrameBuffer classes
 
@@ -89,4 +89,8 @@ A hierarchy of frame buffer classes has been added. These allow for flexible ada
 
 ## press_keys (.hpp, .cpp)
 
-This class implements the Buttons Extension: 6 mechanical press buttons that replace the touch keys. To be used, at compile time, EXTENDED_CASE must be #defined. The `TouchKeys` class will then **not** be included.  
+This class implements the Buttons Extension: 6 mechanical press buttons that replace the touch keys. To be used, at compile time, EXTENDED_CASE must be #defined. The `TouchKeys` class will then **not** be included.  
+
+## Screen Rotation
+
+All drivers implement physical screen coordinates. The rotation is the property of the graphical environment that sit on top of the drivers. As such, all rotation related methods have been moved outside of the driver classes.

README.md

@@ -1,4 +1,18 @@
-# ESP-IDF-InkPlate Library Version 0.9.4
+# ESP-IDF-InkPlate Library Version 0.9.5
+
+(July, 15, 2021)
+
+(Not ready yet...)
+Version 0.9.5: 
+
+- Corrected issue with PlatformIO Espressif32 version 3.3.0 (wifi_interface_t vs esp_interface_t)
+- Added InkPlate-6PLUS support: Screen, Touch Screen, Front Light. `INKPLATE_6PLUS` must be defined to compile for this device. For the TouchScreen class, TouchPositions has been defined as an array of 2 entries to minimize the potential of bad methods parameters.
+- Some code refactoring in drivers. 
+- I2C speed lowered to 100Khz instead of 1Mhz (Wire class). This to respect I2C hardware limitation related to the PullUp resistors in used with Inkplate devices.
+- Added Inkplate::lightSleep() and Inkplate::deepSleep() methods, calling the InkplatePlatform class methods
+- InkplatePlatform::light_sleep() and InkplatePlatform::deep_sleep() methods modified to get gpio number and level as parameters
+- Inkplate::begin() method now allows for one parameter to enable/disable the SDCard initialization. Disabled by default.
+- For the InkPlate-6PLUS, the Inkplate::begin() method takes a second paremeter: a handler function pointer to process touch_screen interrupts.
 
 (March 4, 2021)
 

examples/Basic_Inkplate_Functionality/Inkplate-basic_partial_update/CMakeLists.txt

@@ -1,3 +1,3 @@
 cmake_minimum_required(VERSION 3.16.0)
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
-project(Inkplate-basic_custom_font)
+project(Inkplate-basic_partial_update)

examples/Basic_Inkplate_Functionality/Inkplate-basic_partial_update/platformio.ini

@@ -47,7 +47,7 @@ upload_speed           = 230400
 monitor_filters        = colorize
 board_build.f_cpu      = 240000000L
 board_build.partitions = partitions.csv
-lib_deps               = https://github.com/turgu1/ESP-IDF-InkPlate.git
+lib_deps               = https://github.com/turgu1/ESP-IDF-InkPlate.git#v0.9.5
 build_flags =
   -std=gnu++17
   -D CONFIG_SPIRAM_CACHE_WORKAROUND

examples/Basic_Inkplate_Functionality/Inkplate-basic_partial_update/sdkconfig

@@ -30,6 +30,7 @@ CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y
 CONFIG_APP_COMPILE_TIME_DATE=y
 # CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
 # CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
+# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
 CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
 # end of Application manager
 
@@ -72,6 +73,7 @@ CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0
 # Serial flasher config
 #
 CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
+CONFIG_ESPTOOLPY_WITH_STUB=y
 # CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set
 # CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
 CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
@@ -155,6 +157,8 @@ CONFIG_APPTRACE_LOCK_ENABLE=y
 #
 # CONFIG_BT_ENABLED is not set
 CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF=0
+CONFIG_BTDM_CTRL_PCM_ROLE_EFF=0
+CONFIG_BTDM_CTRL_PCM_POLAR_EFF=0
 CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF=0
 CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF=0
 CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF=0
@@ -163,8 +167,6 @@ CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF=1
 CONFIG_BT_RESERVE_DRAM=0
 # end of Bluetooth
 
-# CONFIG_BLE_MESH is not set
-
 #
 # CoAP Configuration
 #
@@ -222,6 +224,7 @@ CONFIG_EFUSE_MAX_BLK_LEN=192
 # ESP-TLS
 #
 CONFIG_ESP_TLS_USING_MBEDTLS=y
+# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set
 # CONFIG_ESP_TLS_SERVER is not set
 # CONFIG_ESP_TLS_PSK_VERIFICATION is not set
 # end of ESP-TLS
@@ -229,6 +232,7 @@ CONFIG_ESP_TLS_USING_MBEDTLS=y
 #
 # ESP32-specific
 #
+CONFIG_ESP32_ECO3_CACHE_LOCK_FIX=y
 CONFIG_ESP32_REV_MIN_0=y
 # CONFIG_ESP32_REV_MIN_1 is not set
 # CONFIG_ESP32_REV_MIN_2 is not set
@@ -245,6 +249,7 @@ CONFIG_ESP32_SPIRAM_SUPPORT=y
 # SPI RAM config
 #
 CONFIG_SPIRAM_TYPE_AUTO=y
+# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set
 # CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
 # CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
 CONFIG_SPIRAM_SIZE=-1
@@ -294,6 +299,7 @@ CONFIG_D2WD_PSRAM_CS_IO=10
 CONFIG_PICO_PSRAM_CS_IO=10
 # end of PSRAM clock and cs IO for ESP32-PICO
 
+# CONFIG_SPIRAM_CUSTOM_SPIWP_SD3_PIN is not set
 CONFIG_SPIRAM_SPIWP_SD3_PIN=7
 # CONFIG_SPIRAM_2T_MODE is not set
 # end of SPI RAM config
@@ -305,10 +311,6 @@ CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y
 CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4
 # CONFIG_ESP32_ULP_COPROC_ENABLED is not set
 CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=0
-# CONFIG_ESP32_PANIC_PRINT_HALT is not set
-CONFIG_ESP32_PANIC_PRINT_REBOOT=y
-# CONFIG_ESP32_PANIC_SILENT_REBOOT is not set
-# CONFIG_ESP32_PANIC_GDBSTUB is not set
 CONFIG_ESP32_DEBUG_OCDAWARE=y
 CONFIG_ESP32_BROWNOUT_DET=y
 CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y
@@ -359,19 +361,19 @@ CONFIG_ADC_CAL_LUT_ENABLE=y
 #
 # Common ESP-related
 #
-# CONFIG_ESP_TIMER_PROFILING is not set
 CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
 CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
 CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=4608
 CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
 CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
 CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
-CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
 CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
 CONFIG_ESP_CONSOLE_UART_DEFAULT=y
 # CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
 # CONFIG_ESP_CONSOLE_UART_NONE is not set
 CONFIG_ESP_CONSOLE_UART_NUM=0
+CONFIG_ESP_CONSOLE_UART_TX_GPIO=1
+CONFIG_ESP_CONSOLE_UART_RX_GPIO=3
 CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
 CONFIG_ESP_INT_WDT=y
 CONFIG_ESP_INT_WDT_TIMEOUT_MS=1000
@@ -382,6 +384,11 @@ CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
 # CONFIG_ESP_PANIC_HANDLER_IRAM is not set
+CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_BT_OFFSET=2
+CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
 # end of Common ESP-related
 
 #
@@ -430,6 +437,7 @@ CONFIG_HTTPD_MAX_URI_LEN=512
 CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
 CONFIG_HTTPD_PURGE_BUF_LEN=32
 # CONFIG_HTTPD_LOG_PURGE_DATA is not set
+# CONFIG_HTTPD_WS_SUPPORT is not set
 # end of HTTP Server
 
 #
@@ -453,6 +461,24 @@ CONFIG_ESP_NETIF_TCPIP_LWIP=y
 CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
 # end of ESP NETIF Adapter
 
+#
+# ESP System Settings
+#
+# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
+CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
+# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
+# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
+# end of ESP System Settings
+
+#
+# High resolution timer (esp_timer)
+#
+# CONFIG_ESP_TIMER_PROFILING is not set
+CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
+# CONFIG_ESP_TIMER_IMPL_FRC2 is not set
+CONFIG_ESP_TIMER_IMPL_TG0_LAC=y
+# end of High resolution timer (esp_timer)
+
 #
 # Wi-Fi
 #
@@ -461,6 +487,7 @@ CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
 CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=y
 CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=0
 CONFIG_ESP32_WIFI_STATIC_TX_BUFFER_NUM=16
+CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=32
 # CONFIG_ESP32_WIFI_CSI_ENABLED is not set
 CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
 CONFIG_ESP32_WIFI_TX_BA_WIN=6
@@ -587,11 +614,11 @@ CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10
 CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
 # CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
 # CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
-# CONFIG_FREERTOS_DEBUG_INTERNALS is not set
 CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
 CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
 # CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
 CONFIG_FREERTOS_DEBUG_OCDAWARE=y
+# CONFIG_FREERTOS_FPU_IN_ISR is not set
 # end of FreeRTOS
 
 #
@@ -603,6 +630,7 @@ CONFIG_HEAP_POISONING_DISABLED=y
 CONFIG_HEAP_TRACING_OFF=y
 # CONFIG_HEAP_TRACING_STANDALONE is not set
 # CONFIG_HEAP_TRACING_TOHOST is not set
+# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set
 # end of Heap memory debugging
 
 #
@@ -647,8 +675,11 @@ CONFIG_LWIP_SO_REUSE=y
 CONFIG_LWIP_SO_REUSE_RXTOALL=y
 # CONFIG_LWIP_SO_RCVBUF is not set
 # CONFIG_LWIP_NETBUF_RECVINFO is not set
-CONFIG_LWIP_IP_FRAG=y
-# CONFIG_LWIP_IP_REASSEMBLY is not set
+CONFIG_LWIP_IP4_FRAG=y
+CONFIG_LWIP_IP6_FRAG=y
+# CONFIG_LWIP_IP4_REASSEMBLY is not set
+# CONFIG_LWIP_IP6_REASSEMBLY is not set
+# CONFIG_LWIP_IP_FORWARD is not set
 # CONFIG_LWIP_STATS is not set
 # CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set
 CONFIG_LWIP_ESP_GRATUITOUS_ARP=y
@@ -674,6 +705,7 @@ CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
 #
 CONFIG_LWIP_MAX_ACTIVE_TCP=16
 CONFIG_LWIP_MAX_LISTENING_TCP=16
+CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y
 CONFIG_LWIP_TCP_MAXRTX=12
 CONFIG_LWIP_TCP_SYNMAXRTX=6
 CONFIG_LWIP_TCP_MSS=1440
@@ -688,6 +720,7 @@ CONFIG_LWIP_TCP_QUEUE_OOSEQ=y
 CONFIG_LWIP_TCP_OVERSIZE_MSS=y
 # CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
 # CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
+CONFIG_LWIP_TCP_RTO_TIME=1500
 # end of TCP
 
 #
@@ -703,6 +736,8 @@ CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
 # CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
 CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
 # CONFIG_LWIP_PPP_SUPPORT is not set
+CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
+CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
 
 #
 # ICMP
@@ -723,6 +758,8 @@ CONFIG_LWIP_MAX_RAW_PCBS=16
 CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1
 CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000
 # end of SNTP
+
+CONFIG_LWIP_ESP_LWIP_ASSERT=y
 # end of LWIP
 
 #
@@ -735,14 +772,30 @@ CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
 CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y
 CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
 CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
+# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set
 # CONFIG_MBEDTLS_DEBUG is not set
+
+#
+# Certificate Bundle
+#
+CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
+CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
+# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set
+# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set
+# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set
+# end of Certificate Bundle
+
 # CONFIG_MBEDTLS_ECP_RESTARTABLE is not set
 # CONFIG_MBEDTLS_CMAC_C is not set
 CONFIG_MBEDTLS_HARDWARE_AES=y
 CONFIG_MBEDTLS_HARDWARE_MPI=y
 CONFIG_MBEDTLS_HARDWARE_SHA=y
+# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set
+# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set
 CONFIG_MBEDTLS_HAVE_TIME=y
 # CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
+CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
+CONFIG_MBEDTLS_SHA512_C=y
 CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
 # CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
 # CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
@@ -803,6 +856,7 @@ CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
 CONFIG_MBEDTLS_ECP_C=y
 CONFIG_MBEDTLS_ECDH_C=y
 CONFIG_MBEDTLS_ECDSA_C=y
+# CONFIG_MBEDTLS_ECJPAKE_C is not set
 CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
 CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
 CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
@@ -816,6 +870,10 @@ CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
 CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
 CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
 CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
+# CONFIG_MBEDTLS_POLY1305_C is not set
+# CONFIG_MBEDTLS_CHACHA20_C is not set
+# CONFIG_MBEDTLS_HKDF_C is not set
+# CONFIG_MBEDTLS_THREADING_C is not set
 # CONFIG_MBEDTLS_SECURITY_RISKS is not set
 # end of mbedTLS
 
@@ -824,6 +882,7 @@ CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
 #
 CONFIG_MDNS_MAX_SERVICES=10
 CONFIG_MDNS_TASK_PRIORITY=1
+CONFIG_MDNS_TASK_STACK_SIZE=4096
 # CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set
 CONFIG_MDNS_TASK_AFFINITY_CPU0=y
 # CONFIG_MDNS_TASK_AFFINITY_CPU1 is not set
@@ -892,6 +951,7 @@ CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y
 # CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set
 # CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set
 # CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set
+# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set
 # CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set
 CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y
 CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20
@@ -901,6 +961,7 @@ CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1
 # Auto-detect flash chips
 #
 CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y
+CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
 CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
 # end of Auto-detect flash chips
 # end of SPI Flash driver
@@ -941,6 +1002,18 @@ CONFIG_SPIFFS_USE_MTIME=y
 # end of Debug Configuration
 # end of SPIFFS Configuration
 
+#
+# TinyUSB
+#
+
+#
+# Descriptor configuration
+#
+CONFIG_USB_DESC_CUSTOM_VID=0x1234
+CONFIG_USB_DESC_CUSTOM_PID=0x5678
+# end of Descriptor configuration
+# end of TinyUSB
+
 #
 # Unity unit testing library
 #
@@ -955,14 +1028,17 @@ CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
 #
 # Virtual file system
 #
+CONFIG_VFS_SUPPORT_IO=y
+CONFIG_VFS_SUPPORT_DIR=y
+CONFIG_VFS_SUPPORT_SELECT=y
 CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y
 CONFIG_VFS_SUPPORT_TERMIOS=y
 
 #
 # Host File System I/O (Semihosting)
 #
-CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
-CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
+CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
+CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
 # end of Host File System I/O (Semihosting)
 # end of Virtual file system
 
@@ -985,7 +1061,9 @@ CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
 # Supplicant
 #
 CONFIG_WPA_MBEDTLS_CRYPTO=y
-# CONFIG_WPA_TLS_V12 is not set
+# CONFIG_WPA_DEBUG_PRINT is not set
+# CONFIG_WPA_TESTING_OPTIONS is not set
+# CONFIG_WPA_WPS_WARS is not set
 # end of Supplicant
 # end of Component config
 
@@ -1069,11 +1147,12 @@ CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
 CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=4608
 CONFIG_MAIN_TASK_STACK_SIZE=3584
 CONFIG_IPC_TASK_STACK_SIZE=1024
-CONFIG_TIMER_TASK_STACK_SIZE=3584
 CONFIG_CONSOLE_UART_DEFAULT=y
 # CONFIG_CONSOLE_UART_CUSTOM is not set
 # CONFIG_CONSOLE_UART_NONE is not set
 CONFIG_CONSOLE_UART_NUM=0
+CONFIG_CONSOLE_UART_TX_GPIO=1
+CONFIG_CONSOLE_UART_RX_GPIO=3
 CONFIG_CONSOLE_UART_BAUDRATE=115200
 CONFIG_INT_WDT=y
 CONFIG_INT_WDT_TIMEOUT_MS=1000
@@ -1086,6 +1165,11 @@ CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
 # CONFIG_EVENT_LOOP_PROFILING is not set
 CONFIG_POST_EVENTS_FROM_ISR=y
 CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
+# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set
+CONFIG_ESP32S2_PANIC_PRINT_REBOOT=y
+# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set
+# CONFIG_ESP32S2_PANIC_GDBSTUB is not set
+CONFIG_TIMER_TASK_STACK_SIZE=3584
 CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150
 CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
 CONFIG_MB_QUEUE_LENGTH=20
@@ -1142,4 +1226,6 @@ CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
 # CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
 CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
 CONFIG_SUPPORT_TERMIOS=y
+CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
+CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
 # End of deprecated options

examples/Basic_Inkplate_Functionality/Inkplate-basic_partial_update/src/main.cpp

@@ -30,18 +30,16 @@ static const char * TAG = "Main";
   int max = 9;
 #elif defined(INKPLATE_6PLUS)
   const char text[] = "This is partial update on Inkplate 6PLUS e-paper display! :)";
-  int max = 30;
+  int max = 999;
 #else
   const char text[] = "This is partial update on Inkplate 10 e-paper display! :)";
-  int max = 50;
+  int max = 9;
 #endif
 
 // This variable is used for moving the text (scrolling)
 int offset;
 int w, h;
 
-void delay(int msec) { vTaskDelay(msec / portTICK_PERIOD_MS); }
-
 // Variable that keeps count on how much screen has been partially updated
 int n = 0;
 void mainTask(void * param)
@@ -78,7 +76,7 @@ void mainTask(void * param)
     offset -= 20; // Move text into new position
     if (offset < 0)
         offset = w; // Text is scrolled till the end of the screen? Get it back on the start!
-    delay(200);   // Delay between refreshes.
+    ESP::delay(200);   // Delay between refreshes.
   }
 }
 

examples/Basic_Inkplate_Functionality/Inkplate_basic_BW/platformio.ini

@@ -47,7 +47,8 @@ upload_speed           = 230400
 monitor_filters        = colorize
 board_build.f_cpu      = 240000000L
 board_build.partitions = partitions.csv
-lib_deps               = https://github.com/turgu1/ESP-IDF-InkPlate.git
+;lib_deps               = https://github.com/turgu1/ESP-IDF-InkPlate.git
+lib_deps               = /home/turgu1/Dev/ESP-IDF-InkPlate
 build_flags =
   -std=gnu++17
   -D CONFIG_SPIRAM_CACHE_WORKAROUND

examples/Basic_Inkplate_Functionality/Inkplate_basic_BW/sdkconfig

@@ -30,6 +30,7 @@ CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y
 CONFIG_APP_COMPILE_TIME_DATE=y
 # CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
 # CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
+# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
 CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
 # end of Application manager
 
@@ -72,6 +73,7 @@ CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0
 # Serial flasher config
 #
 CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
+CONFIG_ESPTOOLPY_WITH_STUB=y
 # CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set
 # CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
 CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
@@ -155,6 +157,8 @@ CONFIG_APPTRACE_LOCK_ENABLE=y
 #
 # CONFIG_BT_ENABLED is not set
 CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF=0
+CONFIG_BTDM_CTRL_PCM_ROLE_EFF=0
+CONFIG_BTDM_CTRL_PCM_POLAR_EFF=0
 CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF=0
 CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF=0
 CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF=0
@@ -163,8 +167,6 @@ CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF=1
 CONFIG_BT_RESERVE_DRAM=0
 # end of Bluetooth
 
-# CONFIG_BLE_MESH is not set
-
 #
 # CoAP Configuration
 #
@@ -222,6 +224,7 @@ CONFIG_EFUSE_MAX_BLK_LEN=192
 # ESP-TLS
 #
 CONFIG_ESP_TLS_USING_MBEDTLS=y
+# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set
 # CONFIG_ESP_TLS_SERVER is not set
 # CONFIG_ESP_TLS_PSK_VERIFICATION is not set
 # end of ESP-TLS
@@ -229,6 +232,7 @@ CONFIG_ESP_TLS_USING_MBEDTLS=y
 #
 # ESP32-specific
 #
+CONFIG_ESP32_ECO3_CACHE_LOCK_FIX=y
 CONFIG_ESP32_REV_MIN_0=y
 # CONFIG_ESP32_REV_MIN_1 is not set
 # CONFIG_ESP32_REV_MIN_2 is not set
@@ -245,6 +249,7 @@ CONFIG_ESP32_SPIRAM_SUPPORT=y
 # SPI RAM config
 #
 CONFIG_SPIRAM_TYPE_AUTO=y
+# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set
 # CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
 # CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
 CONFIG_SPIRAM_SIZE=-1
@@ -294,6 +299,7 @@ CONFIG_D2WD_PSRAM_CS_IO=10
 CONFIG_PICO_PSRAM_CS_IO=10
 # end of PSRAM clock and cs IO for ESP32-PICO
 
+# CONFIG_SPIRAM_CUSTOM_SPIWP_SD3_PIN is not set
 CONFIG_SPIRAM_SPIWP_SD3_PIN=7
 # CONFIG_SPIRAM_2T_MODE is not set
 # end of SPI RAM config
@@ -305,10 +311,6 @@ CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y
 CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4
 # CONFIG_ESP32_ULP_COPROC_ENABLED is not set
 CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=0
-# CONFIG_ESP32_PANIC_PRINT_HALT is not set
-CONFIG_ESP32_PANIC_PRINT_REBOOT=y
-# CONFIG_ESP32_PANIC_SILENT_REBOOT is not set
-# CONFIG_ESP32_PANIC_GDBSTUB is not set
 CONFIG_ESP32_DEBUG_OCDAWARE=y
 CONFIG_ESP32_BROWNOUT_DET=y
 CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y
@@ -359,19 +361,19 @@ CONFIG_ADC_CAL_LUT_ENABLE=y
 #
 # Common ESP-related
 #
-# CONFIG_ESP_TIMER_PROFILING is not set
 CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
 CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
 CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=4608
 CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
 CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
 CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
-CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
 CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
 CONFIG_ESP_CONSOLE_UART_DEFAULT=y
 # CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
 # CONFIG_ESP_CONSOLE_UART_NONE is not set
 CONFIG_ESP_CONSOLE_UART_NUM=0
+CONFIG_ESP_CONSOLE_UART_TX_GPIO=1
+CONFIG_ESP_CONSOLE_UART_RX_GPIO=3
 CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
 CONFIG_ESP_INT_WDT=y
 CONFIG_ESP_INT_WDT_TIMEOUT_MS=1000
@@ -382,6 +384,11 @@ CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
 # CONFIG_ESP_PANIC_HANDLER_IRAM is not set
+CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_BT_OFFSET=2
+CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
 # end of Common ESP-related
 
 #
@@ -430,6 +437,7 @@ CONFIG_HTTPD_MAX_URI_LEN=512
 CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
 CONFIG_HTTPD_PURGE_BUF_LEN=32
 # CONFIG_HTTPD_LOG_PURGE_DATA is not set
+# CONFIG_HTTPD_WS_SUPPORT is not set
 # end of HTTP Server
 
 #
@@ -453,6 +461,24 @@ CONFIG_ESP_NETIF_TCPIP_LWIP=y
 CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
 # end of ESP NETIF Adapter
 
+#
+# ESP System Settings
+#
+# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
+CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
+# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
+# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
+# end of ESP System Settings
+
+#
+# High resolution timer (esp_timer)
+#
+# CONFIG_ESP_TIMER_PROFILING is not set
+CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
+# CONFIG_ESP_TIMER_IMPL_FRC2 is not set
+CONFIG_ESP_TIMER_IMPL_TG0_LAC=y
+# end of High resolution timer (esp_timer)
+
 #
 # Wi-Fi
 #
@@ -461,6 +487,7 @@ CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
 CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=y
 CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=0
 CONFIG_ESP32_WIFI_STATIC_TX_BUFFER_NUM=16
+CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=32
 # CONFIG_ESP32_WIFI_CSI_ENABLED is not set
 CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
 CONFIG_ESP32_WIFI_TX_BA_WIN=6
@@ -587,11 +614,11 @@ CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10
 CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
 # CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
 # CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
-# CONFIG_FREERTOS_DEBUG_INTERNALS is not set
 CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
 CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
 # CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
 CONFIG_FREERTOS_DEBUG_OCDAWARE=y
+# CONFIG_FREERTOS_FPU_IN_ISR is not set
 # end of FreeRTOS
 
 #
@@ -603,6 +630,7 @@ CONFIG_HEAP_POISONING_DISABLED=y
 CONFIG_HEAP_TRACING_OFF=y
 # CONFIG_HEAP_TRACING_STANDALONE is not set
 # CONFIG_HEAP_TRACING_TOHOST is not set
+# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set
 # end of Heap memory debugging
 
 #
@@ -647,8 +675,11 @@ CONFIG_LWIP_SO_REUSE=y
 CONFIG_LWIP_SO_REUSE_RXTOALL=y
 # CONFIG_LWIP_SO_RCVBUF is not set
 # CONFIG_LWIP_NETBUF_RECVINFO is not set
-CONFIG_LWIP_IP_FRAG=y
-# CONFIG_LWIP_IP_REASSEMBLY is not set
+CONFIG_LWIP_IP4_FRAG=y
+CONFIG_LWIP_IP6_FRAG=y
+# CONFIG_LWIP_IP4_REASSEMBLY is not set
+# CONFIG_LWIP_IP6_REASSEMBLY is not set
+# CONFIG_LWIP_IP_FORWARD is not set
 # CONFIG_LWIP_STATS is not set
 # CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set
 CONFIG_LWIP_ESP_GRATUITOUS_ARP=y
@@ -674,6 +705,7 @@ CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
 #
 CONFIG_LWIP_MAX_ACTIVE_TCP=16
 CONFIG_LWIP_MAX_LISTENING_TCP=16
+CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y
 CONFIG_LWIP_TCP_MAXRTX=12
 CONFIG_LWIP_TCP_SYNMAXRTX=6
 CONFIG_LWIP_TCP_MSS=1440
@@ -688,6 +720,7 @@ CONFIG_LWIP_TCP_QUEUE_OOSEQ=y
 CONFIG_LWIP_TCP_OVERSIZE_MSS=y
 # CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
 # CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
+CONFIG_LWIP_TCP_RTO_TIME=1500
 # end of TCP
 
 #
@@ -703,6 +736,8 @@ CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
 # CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
 CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
 # CONFIG_LWIP_PPP_SUPPORT is not set
+CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
+CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
 
 #
 # ICMP
@@ -723,6 +758,8 @@ CONFIG_LWIP_MAX_RAW_PCBS=16
 CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1
 CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000
 # end of SNTP
+
+CONFIG_LWIP_ESP_LWIP_ASSERT=y
 # end of LWIP
 
 #
@@ -735,14 +772,30 @@ CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
 CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y
 CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
 CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
+# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set
 # CONFIG_MBEDTLS_DEBUG is not set
+
+#
+# Certificate Bundle
+#
+CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
+CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
+# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set
+# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set
+# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set
+# end of Certificate Bundle
+
 # CONFIG_MBEDTLS_ECP_RESTARTABLE is not set
 # CONFIG_MBEDTLS_CMAC_C is not set
 CONFIG_MBEDTLS_HARDWARE_AES=y
 CONFIG_MBEDTLS_HARDWARE_MPI=y
 CONFIG_MBEDTLS_HARDWARE_SHA=y
+# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set
+# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set
 CONFIG_MBEDTLS_HAVE_TIME=y
 # CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
+CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
+CONFIG_MBEDTLS_SHA512_C=y
 CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
 # CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
 # CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
@@ -803,6 +856,7 @@ CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
 CONFIG_MBEDTLS_ECP_C=y
 CONFIG_MBEDTLS_ECDH_C=y
 CONFIG_MBEDTLS_ECDSA_C=y
+# CONFIG_MBEDTLS_ECJPAKE_C is not set
 CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
 CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
 CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
@@ -816,6 +870,10 @@ CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
 CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
 CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
 CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
+# CONFIG_MBEDTLS_POLY1305_C is not set
+# CONFIG_MBEDTLS_CHACHA20_C is not set
+# CONFIG_MBEDTLS_HKDF_C is not set
+# CONFIG_MBEDTLS_THREADING_C is not set
 # CONFIG_MBEDTLS_SECURITY_RISKS is not set
 # end of mbedTLS
 
@@ -824,6 +882,7 @@ CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
 #
 CONFIG_MDNS_MAX_SERVICES=10
 CONFIG_MDNS_TASK_PRIORITY=1
+CONFIG_MDNS_TASK_STACK_SIZE=4096
 # CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set
 CONFIG_MDNS_TASK_AFFINITY_CPU0=y
 # CONFIG_MDNS_TASK_AFFINITY_CPU1 is not set
@@ -892,6 +951,7 @@ CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y
 # CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set
 # CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set
 # CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set
+# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set
 # CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set
 CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y
 CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20
@@ -901,6 +961,7 @@ CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1
 # Auto-detect flash chips
 #
 CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y
+CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
 CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
 # end of Auto-detect flash chips
 # end of SPI Flash driver
@@ -941,6 +1002,18 @@ CONFIG_SPIFFS_USE_MTIME=y
 # end of Debug Configuration
 # end of SPIFFS Configuration
 
+#
+# TinyUSB
+#
+
+#
+# Descriptor configuration
+#
+CONFIG_USB_DESC_CUSTOM_VID=0x1234
+CONFIG_USB_DESC_CUSTOM_PID=0x5678
+# end of Descriptor configuration
+# end of TinyUSB
+
 #
 # Unity unit testing library
 #
@@ -955,14 +1028,17 @@ CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
 #
 # Virtual file system
 #
+CONFIG_VFS_SUPPORT_IO=y
+CONFIG_VFS_SUPPORT_DIR=y
+CONFIG_VFS_SUPPORT_SELECT=y
 CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y
 CONFIG_VFS_SUPPORT_TERMIOS=y
 
 #
 # Host File System I/O (Semihosting)
 #
-CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
-CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
+CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
+CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
 # end of Host File System I/O (Semihosting)
 # end of Virtual file system
 
@@ -985,7 +1061,9 @@ CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
 # Supplicant
 #
 CONFIG_WPA_MBEDTLS_CRYPTO=y
-# CONFIG_WPA_TLS_V12 is not set
+# CONFIG_WPA_DEBUG_PRINT is not set
+# CONFIG_WPA_TESTING_OPTIONS is not set
+# CONFIG_WPA_WPS_WARS is not set
 # end of Supplicant
 # end of Component config
 
@@ -1069,11 +1147,12 @@ CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
 CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=4608
 CONFIG_MAIN_TASK_STACK_SIZE=3584
 CONFIG_IPC_TASK_STACK_SIZE=1024
-CONFIG_TIMER_TASK_STACK_SIZE=3584
 CONFIG_CONSOLE_UART_DEFAULT=y
 # CONFIG_CONSOLE_UART_CUSTOM is not set
 # CONFIG_CONSOLE_UART_NONE is not set
 CONFIG_CONSOLE_UART_NUM=0
+CONFIG_CONSOLE_UART_TX_GPIO=1
+CONFIG_CONSOLE_UART_RX_GPIO=3
 CONFIG_CONSOLE_UART_BAUDRATE=115200
 CONFIG_INT_WDT=y
 CONFIG_INT_WDT_TIMEOUT_MS=1000
@@ -1086,6 +1165,11 @@ CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
 # CONFIG_EVENT_LOOP_PROFILING is not set
 CONFIG_POST_EVENTS_FROM_ISR=y
 CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
+# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set
+CONFIG_ESP32S2_PANIC_PRINT_REBOOT=y
+# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set
+# CONFIG_ESP32S2_PANIC_GDBSTUB is not set
+CONFIG_TIMER_TASK_STACK_SIZE=3584
 CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150
 CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
 CONFIG_MB_QUEUE_LENGTH=20
@@ -1142,4 +1226,6 @@ CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
 # CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
 CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
 CONFIG_SUPPORT_TERMIOS=y
+CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
+CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
 # End of deprecated options

examples/Basic_Inkplate_Functionality/Inkplate_basic_BW/src/main.cpp

@@ -49,14 +49,12 @@ int random(int a, int b)
   return (a + (r * b) / RAND_MAX);
 }
 
-void delay(int msec) { vTaskDelay(msec / portTICK_PERIOD_MS); }
-
 void mainTask(void * params) 
 {
   // Show a downcount of 10 seconds at the usb port
   for (int i = 10; i > 0; i--) {
     std::cout << "\r" << i << "..." << std::flush;
-    vTaskDelay(1000 / portTICK_PERIOD_MS);
+    ESP::delay(1000);
   }
   std::cout << std::endl << std::flush;
 
@@ -83,7 +81,7 @@ void mainTask(void * params)
   #endif
 
   display.display(); // Write hello message
-  delay(5000);
+  ESP::delay(5000);
 
   for (;;) { 
     display.setRotation(0);
@@ -101,7 +99,7 @@ void mainTask(void * params)
                                         // since Inkplate is in BW mode)
     display.display(); // Send image to display. You need to call this one each time you want to transfer frame buffer
                        // to the screen.
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -113,7 +111,7 @@ void mainTask(void * params)
     }
     displayCurrentAction("Drawing 600 random pixels");
     display.display(); // Write everything from frame buffer to screen
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -125,7 +123,7 @@ void mainTask(void * params)
     display.drawLine(w - 1, 0, 0, h - 1, BLACK); // with those. Arguments are: start X, start Y, ending X, ending Y, color.
     displayCurrentAction("Drawing two diagonal lines");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -137,7 +135,7 @@ void mainTask(void * params)
     }
     displayCurrentAction("Drawing 50 random lines");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -150,7 +148,7 @@ void mainTask(void * params)
     }
     displayCurrentAction("Drawing 50 random lines");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -159,7 +157,7 @@ void mainTask(void * params)
     display.drawFastHLine(100, 100, w - 200, BLACK); // Arguments are: starting X, starting Y, length, color
     displayCurrentAction("Drawing one horizontal line");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -168,7 +166,7 @@ void mainTask(void * params)
     display.drawFastVLine(100, 100, h - 200, BLACK); // Arguments are: starting X, starting Y, length, color
     displayCurrentAction("Drawing one vertical line");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -184,7 +182,7 @@ void mainTask(void * params)
     }
     displayCurrentAction("Drawing a grid using horizontal and vertical lines");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -193,7 +191,7 @@ void mainTask(void * params)
     display.drawRect(200, 200, 400, 300, BLACK); // Arguments are: start X, start Y, size X, size Y, color
     displayCurrentAction("Drawing rectangle");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -205,7 +203,7 @@ void mainTask(void * params)
     }
     displayCurrentAction("Drawing many rectangles");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -214,7 +212,7 @@ void mainTask(void * params)
     display.fillRect(200, 200, 400, 300, BLACK); // Arguments are: start X, start Y, size X, size Y, color
     displayCurrentAction("Drawing black rectangle");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -226,7 +224,7 @@ void mainTask(void * params)
     }
     displayCurrentAction("Drawing many filled rectangles randomly");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -235,7 +233,7 @@ void mainTask(void * params)
     display.drawCircle(w / 2, h / 2, 75, BLACK); // Arguments are: start X, start Y, radius, color
     displayCurrentAction("Drawing a circle");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -247,7 +245,7 @@ void mainTask(void * params)
     }
     displayCurrentAction("Drawing many circles randomly");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -256,7 +254,7 @@ void mainTask(void * params)
     display.fillCircle(w / 2, h / 2, 75, BLACK); // Arguments are: start X, start Y, radius, color
     displayCurrentAction("Drawing black-filled circle");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -268,7 +266,7 @@ void mainTask(void * params)
     }
     displayCurrentAction("Drawing many filled circles randomly");
     display.display(); // To show stuff on screen, you always need to call display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -278,7 +276,7 @@ void mainTask(void * params)
                           BLACK); // Arguments are: start X, start Y, size X, size Y, radius, color
     displayCurrentAction("Drawing rectangle with rounded edges");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -290,7 +288,7 @@ void mainTask(void * params)
     }
     displayCurrentAction("Drawing many rounded edges rectangles");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -300,7 +298,7 @@ void mainTask(void * params)
                           BLACK); // Arguments are: start X, start Y, size X, size Y, radius, color
     displayCurrentAction("This is filled rectangle with rounded edges");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -312,7 +310,7 @@ void mainTask(void * params)
     }
     displayCurrentAction("Random rounded edge filled rectangles");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -320,7 +318,7 @@ void mainTask(void * params)
     display.clearDisplay();
     display.drawTriangle(250, 400, 550, 400, 400, 100, BLACK); // Arguments are: X1, Y1, X2, Y2, X3, Y3, color
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -328,7 +326,7 @@ void mainTask(void * params)
     display.fillTriangle(300, 350, 500, 350, 400, 150, BLACK); // Arguments are: X1, Y1, X2, Y2, X3, Y3, color
     displayCurrentAction("Drawing filled triangle inside exsisting one");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -339,7 +337,7 @@ void mainTask(void * params)
                       BLACK); // Arguments are: array variable name, start X, start Y, size X, size Y, color
     displayCurrentAction("Drawing e-radionica.com logo");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
     
@@ -361,7 +359,7 @@ void mainTask(void * params)
     }
     displayCurrentAction("Text in different sizes and shadings");
     display.display(); // To show stuff on screen, you always need to call display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -383,7 +381,7 @@ void mainTask(void * params)
     }
     display.display();
     display.setTextColor(BLACK, WHITE);
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -392,7 +390,7 @@ void mainTask(void * params)
     display.drawElipse(100, 200, w / 2, h / 2, BLACK);
     displayCurrentAction("Drawing an elipse");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -401,7 +399,7 @@ void mainTask(void * params)
     display.fillElipse(100, 200, w / 2, h / 2, BLACK);
     displayCurrentAction("Drawing a filled elipse");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -429,7 +427,7 @@ void mainTask(void * params)
     display.drawPolygon(xt, yt, n, BLACK);
     displayCurrentAction("Drawing a polygon");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -440,7 +438,7 @@ void mainTask(void * params)
     display.fillPolygon(xt, yt, n, BLACK);
     displayCurrentAction("Drawing a filled polygon");
     display.display();
-    delay(5000);
+    ESP::delay(5000);
 
     // -----
 
@@ -461,7 +459,7 @@ void mainTask(void * params)
         display.print("INKPLATE 10");
       #endif
       display.display();
-      delay(5000);
+      ESP::delay(5000);
     }
     display.setTextColor(BLACK, WHITE);
 

examples/Basic_Inkplate_Functionality/Inkplate_basic_gray/platformio.ini

@@ -47,7 +47,8 @@ upload_speed           = 230400
 monitor_filters        = colorize
 board_build.f_cpu      = 240000000L
 board_build.partitions = partitions.csv
-lib_deps               = https://github.com/turgu1/ESP-IDF-InkPlate.git
+;lib_deps               = https://github.com/turgu1/ESP-IDF-InkPlate.git
+lib_deps               = /home/turgu1/Dev/ESP-IDF-InkPlate
 build_flags =
   -std=gnu++17
   -D CONFIG_SPIRAM_CACHE_WORKAROUND

examples/Basic_Inkplate_Functionality/Inkplate_basic_gray/sdkconfig

@@ -30,6 +30,7 @@ CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y
 CONFIG_APP_COMPILE_TIME_DATE=y
 # CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
 # CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
+# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
 CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
 # end of Application manager
 
@@ -72,6 +73,7 @@ CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0
 # Serial flasher config
 #
 CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
+CONFIG_ESPTOOLPY_WITH_STUB=y
 # CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set
 # CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
 CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
@@ -155,6 +157,8 @@ CONFIG_APPTRACE_LOCK_ENABLE=y
 #
 # CONFIG_BT_ENABLED is not set
 CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF=0
+CONFIG_BTDM_CTRL_PCM_ROLE_EFF=0
+CONFIG_BTDM_CTRL_PCM_POLAR_EFF=0
 CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF=0
 CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF=0
 CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF=0
@@ -163,8 +167,6 @@ CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF=1
 CONFIG_BT_RESERVE_DRAM=0
 # end of Bluetooth
 
-# CONFIG_BLE_MESH is not set
-
 #
 # CoAP Configuration
 #
@@ -222,6 +224,7 @@ CONFIG_EFUSE_MAX_BLK_LEN=192
 # ESP-TLS
 #
 CONFIG_ESP_TLS_USING_MBEDTLS=y
+# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set
 # CONFIG_ESP_TLS_SERVER is not set
 # CONFIG_ESP_TLS_PSK_VERIFICATION is not set
 # end of ESP-TLS
@@ -229,6 +232,7 @@ CONFIG_ESP_TLS_USING_MBEDTLS=y
 #
 # ESP32-specific
 #
+CONFIG_ESP32_ECO3_CACHE_LOCK_FIX=y
 CONFIG_ESP32_REV_MIN_0=y
 # CONFIG_ESP32_REV_MIN_1 is not set
 # CONFIG_ESP32_REV_MIN_2 is not set
@@ -245,6 +249,7 @@ CONFIG_ESP32_SPIRAM_SUPPORT=y
 # SPI RAM config
 #
 CONFIG_SPIRAM_TYPE_AUTO=y
+# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set
 # CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
 # CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
 CONFIG_SPIRAM_SIZE=-1
@@ -294,6 +299,7 @@ CONFIG_D2WD_PSRAM_CS_IO=10
 CONFIG_PICO_PSRAM_CS_IO=10
 # end of PSRAM clock and cs IO for ESP32-PICO
 
+# CONFIG_SPIRAM_CUSTOM_SPIWP_SD3_PIN is not set
 CONFIG_SPIRAM_SPIWP_SD3_PIN=7
 # CONFIG_SPIRAM_2T_MODE is not set
 # end of SPI RAM config
@@ -305,10 +311,6 @@ CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y
 CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4
 # CONFIG_ESP32_ULP_COPROC_ENABLED is not set
 CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=0
-# CONFIG_ESP32_PANIC_PRINT_HALT is not set
-CONFIG_ESP32_PANIC_PRINT_REBOOT=y
-# CONFIG_ESP32_PANIC_SILENT_REBOOT is not set
-# CONFIG_ESP32_PANIC_GDBSTUB is not set
 CONFIG_ESP32_DEBUG_OCDAWARE=y
 CONFIG_ESP32_BROWNOUT_DET=y
 CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y
@@ -359,19 +361,19 @@ CONFIG_ADC_CAL_LUT_ENABLE=y
 #
 # Common ESP-related
 #
-# CONFIG_ESP_TIMER_PROFILING is not set
 CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
 CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
 CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=4608
 CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
 CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
 CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
-CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
 CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
 CONFIG_ESP_CONSOLE_UART_DEFAULT=y
 # CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
 # CONFIG_ESP_CONSOLE_UART_NONE is not set
 CONFIG_ESP_CONSOLE_UART_NUM=0
+CONFIG_ESP_CONSOLE_UART_TX_GPIO=1
+CONFIG_ESP_CONSOLE_UART_RX_GPIO=3
 CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
 CONFIG_ESP_INT_WDT=y
 CONFIG_ESP_INT_WDT_TIMEOUT_MS=1000
@@ -382,6 +384,11 @@ CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
 # CONFIG_ESP_PANIC_HANDLER_IRAM is not set
+CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_BT_OFFSET=2
+CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
 # end of Common ESP-related
 
 #
@@ -430,6 +437,7 @@ CONFIG_HTTPD_MAX_URI_LEN=512
 CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
 CONFIG_HTTPD_PURGE_BUF_LEN=32
 # CONFIG_HTTPD_LOG_PURGE_DATA is not set
+# CONFIG_HTTPD_WS_SUPPORT is not set
 # end of HTTP Server
 
 #
@@ -453,6 +461,24 @@ CONFIG_ESP_NETIF_TCPIP_LWIP=y
 CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
 # end of ESP NETIF Adapter
 
+#
+# ESP System Settings
+#
+# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
+CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
+# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
+# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
+# end of ESP System Settings
+
+#
+# High resolution timer (esp_timer)
+#
+# CONFIG_ESP_TIMER_PROFILING is not set
+CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
+# CONFIG_ESP_TIMER_IMPL_FRC2 is not set
+CONFIG_ESP_TIMER_IMPL_TG0_LAC=y
+# end of High resolution timer (esp_timer)
+
 #
 # Wi-Fi
 #
@@ -461,6 +487,7 @@ CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
 CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=y
 CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=0
 CONFIG_ESP32_WIFI_STATIC_TX_BUFFER_NUM=16
+CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=32
 # CONFIG_ESP32_WIFI_CSI_ENABLED is not set
 CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
 CONFIG_ESP32_WIFI_TX_BA_WIN=6
@@ -587,11 +614,11 @@ CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10
 CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
 # CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
 # CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
-# CONFIG_FREERTOS_DEBUG_INTERNALS is not set
 CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
 CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
 # CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
 CONFIG_FREERTOS_DEBUG_OCDAWARE=y
+# CONFIG_FREERTOS_FPU_IN_ISR is not set
 # end of FreeRTOS
 
 #
@@ -603,6 +630,7 @@ CONFIG_HEAP_POISONING_DISABLED=y
 CONFIG_HEAP_TRACING_OFF=y
 # CONFIG_HEAP_TRACING_STANDALONE is not set
 # CONFIG_HEAP_TRACING_TOHOST is not set
+# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set
 # end of Heap memory debugging
 
 #
@@ -647,8 +675,11 @@ CONFIG_LWIP_SO_REUSE=y
 CONFIG_LWIP_SO_REUSE_RXTOALL=y
 # CONFIG_LWIP_SO_RCVBUF is not set
 # CONFIG_LWIP_NETBUF_RECVINFO is not set
-CONFIG_LWIP_IP_FRAG=y
-# CONFIG_LWIP_IP_REASSEMBLY is not set
+CONFIG_LWIP_IP4_FRAG=y
+CONFIG_LWIP_IP6_FRAG=y
+# CONFIG_LWIP_IP4_REASSEMBLY is not set
+# CONFIG_LWIP_IP6_REASSEMBLY is not set
+# CONFIG_LWIP_IP_FORWARD is not set
 # CONFIG_LWIP_STATS is not set
 # CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set
 CONFIG_LWIP_ESP_GRATUITOUS_ARP=y
@@ -674,6 +705,7 @@ CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
 #
 CONFIG_LWIP_MAX_ACTIVE_TCP=16
 CONFIG_LWIP_MAX_LISTENING_TCP=16
+CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y
 CONFIG_LWIP_TCP_MAXRTX=12
 CONFIG_LWIP_TCP_SYNMAXRTX=6
 CONFIG_LWIP_TCP_MSS=1440
@@ -688,6 +720,7 @@ CONFIG_LWIP_TCP_QUEUE_OOSEQ=y
 CONFIG_LWIP_TCP_OVERSIZE_MSS=y
 # CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
 # CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
+CONFIG_LWIP_TCP_RTO_TIME=1500